Truck Body
Dumper / Tipper
IMMA DUMPER / TIPPER BODY – DT SERIES
- Dumper / tipper superstructure for rigid
- Model: DT Series
- Capable to mount the body in buyer premise/site,
- Volume: 12 to 25 m³
- Telescopic tilting
- NPU Steel body chassis (Lower NPU180 and upper NPU140)
- ST-52 steel body : Floor 6mm, sides 4mm (Optional Hardox)
- Lazy rear tap to open during tilting by gravimetric
- Hydraulic Unit:
· 4 level,
· 4500 mm stroke,
· 40-87 screwed type pump
· Includes oil filterBi-directional (up & down) and speed adjustable movement
· Electro-pneumatic controller
· 45°- 50° Tilting,
· 2 lays of epoxy primer coated tipper body after sand blasting and undercoating
· Color: RAL 7001 Grey
· Controlling unit located at driver cabinet
· Included Accessories: Fenders – Tool box – Reflector – Stair – Hooks: All around the dumper trailer,
Models and Specs :
- DT-xx: Dumper body with “xx” volume in cubic meters
- DT-xxH: Dumper body with “xx” volume in cubic meters made of Hardox steel
Courtesy Pictures
Concrete Mixer
IGT CONCRETE MIXERS
IMMA CONCRETE MIXER BODY – TM SERIES
Concrete Mixer Body,
o Developed for ready-mix concrete transporting by meaning of continuous treatment for construction sites from plants
o Nominal Capacity: 10 m³ (Opt. 8-9-11-12 m3)
o Drum Volume: 16,40 m³
o Drum Diameter: 2.350 mm,
o Drum Speed: 1-15 rpm,
o Required Power: 70 hp
o Water Tank: 1000 lt,
o Water Pump: 400 lt/min,
o Chassis Length: 5.450 mm
o Drum Length: 2.750 mm
o Weight Center: 2.395 mm
o Weight: 4.450 kg
o A1 Class ST-37 steel body with 5 mm thickness
o 4 point cradle system
o Coolant: Hydraulic
o Hydraulic Piping: Manuli / Italy
o Running System: Via PTO power from truck (requirement 50 Hp)
o Reducer: Transmital
o Hydraulic Pump: Bosch Rexroth
o Hydraulic Actuator: Bosch Rexroth
o Chassis: A1 Class NPU steel
o 2 lays of epoxy primer coated tipper body after sand
blasting and undercoating
o Controlling unit located at driver cabinet and side
o Accessories: Fenders, Tool box, Reflector, Washing Pipes
IMMA CONCRETE MIXER SEMI-TRAILER – TMT SERIES
CONCRETE MIXING Technical Specifications
o Nominal volume: 12m3
o Tank body 4 mm, front head 6mm, made of ST52 or S500 steel,
o Wheels 280 mm x 160 mm wear steel
o Tank helix internal 4 mm ST52 steel
o Discharge through 4 mm ST52 steel with an extension of 730mm + 1000mm
o Feeder 4 mm ST52 steel
o Hopper with rubber extension or protector
o Discharge line with hydraulic pump controllede up, down, right and left is movements
o Water tank 650 lt made of 4 mm ST52 steel
o 2 x inspection holes Ø500 mm
o Turbination reducer (1 unit) in front of the tank
o Hydraulic engine, Hidrosile brand
o Power take off from truck PTO
o OPTIONAL ITEM: Diesel engine powered hydraulic pump and oil coolant
SEMI-TRAILER Technical Specifications
o Size: Length 9500mm x Width 2550mm x Height 4000mm
o Chassis: Heavy duty metal arc welded as “I” crossing from high resistant ST52 steel
o Axles: 3 x 12 tons, load and height adjustable with bellow Z springs shock absorber with first axle lifting system (drum break)
o Tires: 6+1 Pieces 385/65/R22,5
o Rims: 6+1 Pieces 22.5 ( Jantas – Ako Brand)
o Brake System: WABCO brand EBS braking system. Drum braking system
o King Pin: DIN 74080 standards 2 or 3.5’’ king pin, as per SAE standards, 8 bolt type. With E certificate.
o Electric Installation: As per EEC 24 Certified EU norms.
o Landing Gear: Static 50 tons, dynamic 25 tons capacity
o Painting: Water and chemical prepared, epoxy interlining before 3 lays acrylic main paint.
o STANDARD ACCESSORIES:
• Water Tank
• Stairs
• Spare tire carrier
• Wheel leaning mounting
• Fire extinguisher cabinet
• Preserving cabinet.
• Tool Box
• Mudguards
• Side guards
Tanker Body
Models: WB, SB, VB, DT Series
Volume: Various (Depends on rigid trucks)
Body Materials: ST-37, ST-52
Purpose: Usage Water, Drinking Water, Sludge, Oil, Gasoline, Diesel, …
Box Bodies
Models: BB & FB Series
Volume: Various (Depends on rigid trucks)
Purpose: Various dry good, frozen good, food, …
Hydraulic Body
OL SERIES
- Model: IMMA OL-XX Operator Lift
- Crane body to be mounted on any truck in our or customer premises
- Platform Capacity: 250 kg
- Reaching Length (max.): 16-60m (Depends on customer request)
- Domex-700 heavy duty resistant structure booms
- 360° Rotating capability
- Pump: HYDROCELL make (200 bars)
- Piston pump: 80 l/min
- Oil tank: 100 l
- Hydraulics: Double effected as per ISO standards, equipped with over-center locker
- Hydraulics tubing: Radial, R2 steel meshed,
- Maximum pressure: 200 bar
- Controller: Manual, external located (at side and in the platform)
- Controlling valve: 80 l, ½”
- 4 mm floor and 3 mm sides thickness of body structure,
- Heavy duty insulated and coated body against acid, base and other chemicals
- 2 lays of epoxy primer coated body after sand blasting and undercoating
IMMA CRANE TRUCK BODY
- Model Line: CB
- Crane body to be mounted on any truck in our or customer premises
- Capacity: 5 / 6 / 8 / 10 / 12 tons (at 3m)
- Reaching Length: 7 – 20m
- Domex-700 heavy duty resistant structure
- 360° Rotating capability
- Pump: HYDROCELL make (200 bars)
- Piston pump: 80 l/min
- Oil tank: 100 l
- Hydraulics: Double effected as per ISO standards, equipped with over-center locker
- Hydraulics tubing: Radial, R2 steel meshed,
- Maximum pressure: 200 bar
- Controller: Manual, external located
- Controlling valve: 80 l, ½”
- Weight: 1800 kg.
- 4 mm floor and 3 mm sides thickness of body structure,
- Heavy duty insulated and coated body against acid, base and other chemicals
- 2 lays of epoxy primer coated body after sand blasting and undercoating
Model Definition:
GARBAGE TRUCK BODY
- Bunker: 4 mm thickness, to squeeze the garbage with 160 kg/cm² working pressure including salvage discharging valve
- Heavy duty insulated and coated body against acid, base and other chemicals
- Capable for garbage containers as per DIN 30700, 400 lt volume, with the controllers at rear (by operators)
- Capacity: 8 m³ (GT-08) and 16 m³ (GT-16)
- PTO controller,
- Controller from the cab
- 80 lt oil tank
- 125 micron filter
- Temperature and level gauges,
- Non-welded steel hydraulic piping
- 40-87 screwed type pump,
- Strong and reliable construction,
- ST-37 and ST-52 steel body
- Universal spare parts
- 2 lays of epoxy primer coated body after sand blasting and undercoating
- Accessories: Night lights at the rear, Fenders, Tool box, Reflector, Driver Buzz, Operator steps and holders, Turn
indicator, Disinfection unit (if the vehicle has compressor)
Skip Loader Body
MERCEDES-BENZ Axor 1829 Truck with
IMMA SL-10 Skiploader
o Designed to lift the containers made according to din 30720
o Platform mounted on the chassis truck and transport.
o Dumps the containers to discharge
o Consists of a platform, 2 loading arms, two telescopic arms, landing legs and hydraulic and pneumatic installations,
DIMENSIONS & WEIGHT
o Lifting capacity: 10000 kg -/+10% from ground level.
o Lifting capacity (below ground): 8000 kg
o Container can be lifted below ground level (depends on container)
o Operating times:
- Loading 40 sec
- Unloading 45 sec
- Tipping 35 sec
PLATFORM
o A subframe with cross members is made to suit the chassis truck.
o Specially formed side members enclose the platform. The landing legs at the rear end are connected to side members
o Made of checquered steel. There are side and front stoppers centering the container.
LIFTIN ARMS
o 2 x Lifting arms to lift the containers on the platform and to tilt them to discharge
o Connected to each other to synchronize movement.
o Lubricated bronze bushing at rotating joints
o Pneumatically actuated hook to hold the containers during tipping.
LANDING REAR LEGS
o 2 landing legs at the rear of the equipment to provide the stability during the container lifting.
o Controlled independently and functioned hydraulically.
Semi-Trailer
DST SERIES
DUMPER/TIPPER SEMI-TRAILERS TRAILERS
- Heavy duty chassis
- Various capacities (Standard 22-55 m³ inner volume)
- Axles:
- · 12 tons/axle payload capacity,
- Square cross-sectioned,
- Double bears in each fold,
- Asbestos free brakes,
- Supported shock absorbers,
- Z Type scissors,
- 2” (50,8 mm) King Mile
- Wabco EBS
- Double level, pneumatic brakes as per EU R-13-90 Directives
- Wheels: 6 +1 pcs of 385 / 65 R 22,5 Tubeless Bridgestone
- 2 lays of epoxy primer coated tipper body after sand blasting and undercoating
- Body
- Mild ST-52, Hardox, Reax, Xar, etc. steel with regular or half-pipe design
- Thickness: 4-12 mm
- Chassis made of ST-52 Steel:
- “I” Cross-section heavy duty profile, Thickness: 6 mm
- Hydraulic System
- Cylindir: 5 x 5700 mm Stroke
- Tilting Angle: 45° – 55°
- Pump: PTO type, 109 lt/min capacity
- Level: 2
- R2 Double Steel Tubing
- Electro-pneumatic controller
- 1 level x tilting and 2 levels of untilting
- 24V Electric system as per EU restrictions,
- Accessories:
· Fenders,
· Tool box,
· Water tank,
· Reflector,
· Safety laying iron,
· Rear bumper: Pressed cage, made of ST-37 with 5 mm,
· Stair: 1 x Side and 1x Rear
· Hooks: All around the dumper trailer,
· Stop/signal lights: Replaceable
Flatbed Semi-Trailer
IMMA FBT -MP50/2
MULTI-FUNCTION FLATBED SEM I – TRAILERS
- Model: FBT-MP50/2
- Size (L x W): 12.400 x 2.550 mm
- Chassis:
- Heavy duty resisting steel with I crossed profilechassis
- ST52 A1 Class 6 mm roll-formed internal steel
- ST52 A1 Class 14mm rod
- Axles:
- 2 units, Heavy Duty type
- 14 tons/axle payload,
- 140mm x 140mm square type
- Spring/mechanical for African conditions,
- Asbestos free brakes,
- Supported shock absorbers,
- Z Type scissors,
- Double tyred
- Container Apparatus: 8 x Container locks (2×20’ or 1×40’), ISO type
- Timber Apparatus: 2×6 pcs poles around the side, removable, 1.000 mm length, pole holes connected to strengthed side chassis of 8mm
- 3,5” King Mile (42 Cr-4 Mo) as per SAE/DIN standards,
- Wabco ABS Disc Brakes,
- Landing legs: 2 pcs x 24 tons
- Wheels: 4+1 pcs of 445/65R22 Tubeless
- Steel patterned floor for dry good carriage
- Phosphate coated sandblasted double layed epoxy interlined acrylic painted, as per RAL no’s.
- 24 V Electric installation as per EU norms,
- Accessories:
- Rear bumper: Folding, pressed cage, made of
- ST-37 steel,
- Mudguards
- Food box
- Toolbox
- Fire extinguisher box
- Step tyre point
Courtesy Drawing of IMMA FBT-MP50/2
Lowbed Semi-Trailer
IMMA LBT SERIES
LOW-BED SEMI-TRAILERS
- Models: LBT60 (LBT-40 to LBT-120)
- Loading weight: 60 tons (40tons to 120 tons)
- Goose-head design
- Total length: 19.400 mm
- Loading platform: 14.200 mm
- Height: 1.150 mm (Can be decreased down to 1.050 mm via 19” wheels)
- Goose-head length: 4.000 mm
- Width: 3.000 mm
- Internal chassis width: 450 mm
- Counters: 270 mm
- King pin: 2” or 3½”
- Surface: Trimmed 5 or 6 mm steel or wood
- Axles: 4 x Reverse tandem type spring supported
- 16+1 wheels with 295/60R 22,5 or 275/70R 22,5 Wheels
- OMS Third leg
- IPN 450, ST-44 mono-block chassis (115 kg/m),
- IPN 360 ST-44 mono-block sides (60 kg/m),
- IPN 400 ST-44 mono-block counters (40 kg/m),
- ST-44 steel body: 4 mm
- Wabco EBS
- Hydraulic tilting rump with 3.500 mm length
- 2 lays of epoxy primer coated tipper body after sand blasting and undercoating lay.
- 24 v Electricity installation as per EU norms.
- Make: IMMA Global
- Model: LBT Series
- Capacities: 40t to 170 tons (Or any customized solution)
Remorque
IMMA TANK REMOURQUES
- Model: RT Series
- Multi purpose applications for various materials as water, fertilizer, asphalt, fuel-oil, diesel, water, etc.
- To be towed by agricultural tractors
- Capacity: 2.500 liters up to 20.000 liters)
- Shape: Elliptic
- Overall Length: 10.500 mm (up to 14.500mm)
- Axles:
- Single or tandem
- Heavy duty for off-road and onroad purpose
- Mechanical leaf springs, 10 lays
- As per ISO/TUV Norms,
- Drum brakes
- ST-52 mono-block chassis with I section profile
- Tank Equipment:
- Single/triple compartment with 3 no. of beaters
- A1 Class ST-37 milded
- Galvanized or epoxy coated interlining
- Mechanical foot (1.450 mm)
- Tires: 12,5R8015,3 Agricultural type
- Epoxy primer coated body after sand blasting and undercoating
- 24V Electricity installation as per EEC norms with 7 functioned rear lambs and 6 side lambs.
- Optional Items:
- Fire fighting tools
- Road spraying systems
- Internal PU coating for drinking water transport
- Stainless steel tank
- Pump for discharging
- Pump for charging / discharging
- Various volume x axle capacity & combinations
Silo Semi-Trailer
IMMA SILO SEMI-TRAILERS
- Model: SBT Line
- Specially designed for bulk cement and powder products,
- Internal volume: 20 to 60 m³
- ST-52 mono-block chassis,
- ST-42 steel body: 4 mm
- Tank Equipment:
- 7.200 l/min compressor with electric or diesel engine,
- 2 x Manhole tap for loading
- 4” discharging with butterfly valve
- 2 x Pneumatic valve monometer, 4 bar
- 2” Air pipeline installation,
- Walkaway on the top,
- 11 x collectors with double sided, located inside the silo,
- 6 mt cement tube (for discharging)
- Jet 11/11 additional cement discharging air,
- Exhaust valve ½”
- Automatic safety ventile 1”
- Extra air outlet valve (1½”) for discharging a 2nd vehicle,
- Brake System: As per EEC97/12 regulations, double-circuit pneumatic,
- Pilot type air-suspension axles with Z scissor system (BPW compatible)
- 2 lays of epoxy primer coated tipper body after sand blasting and undercoating
- 24 v Electricity installation as per EEC Norms.
- Accessories:
- Fenders,
- Tool box,
- Reflector,
- Stair,
Optional Items for IMMA SBT Semi-Trailers:
- Diesel compressor (by meaning of Deutz engines)
- Wabco EBS
- Bridgestone tyres
- Spring type axles for heavy-duty conditiones
Tanker Semi-Trailer
IMMA TANKER SEMI-TRAILERS
TST SERIES
“GASOIL / FUEL-OIL / DIESEL/WATER/SLUDGE”
- Model: TST Line Top Loading Tanker Semi-Trailer
- Multi purpose applications for various materials as asphalt, fuel-oil, diesel, water, etc.
- Internal volume: Optimal 33.300 lt (Capacities from 24.000 up to 55.000 liters)
- Shape: Elliptic
- Overall Length: 10.500 mm (up to 14.500mm)
- Axles:
- 3 Units, with 12/14/16 tons payload
- Mechanical HD steel leaf springs, 10 lays
- Local make, as per ISO/TUV Norms (BPW compatible),
- Drum brakes with automatic adjuster (Wabco & Haldex)
- ST-52 mono-block chassis with I section profile
- Tank Equipment:
- Single/triple compartment with 3 no. of beaters
- A1 Class ST-37 milded shell thickness: 5mm floor / 4mm sides
- 2 x Manhole tap for loading
- 2” discharging unit with butterfly valve with 15 meters tubing
- Stairs and walkaway on the top
- King pin: 2” or 3”
- OMS 3rd wheel (2 x 24 tons)
- Tyres: 4-6-12 units, Bridgestone – Pirelli – Fulda – Lassa make, 385/65R22.5 size with 11.75×22.5 wheels (+1 unit step set)
- Plastic mudguards
- 2 lays of epoxy primer coated tipper body after sand blasting and undercoating
- 24V Electricity installation as per EEC norms with 7 functioned rear lambs and 6 side lambs.
- Spare tire locater, accessory box, food box, small water tank (for driver), rear bumper, stair, water tanker, fire extinguisher box
Optional Items:
- ABS/EBD Brakes
- Internal PU coating for drinking water transport
- Stainless steel tank
- Pump for discharging
- Pump for charging / discharging
- Diesel engine for pump
- PTO for pump
- Various volume x axle capacity & combinations
- DSS™ application for non-explosion tanker (Please ask for IMMA’s patented innovative product DSS™)
IMMA TANKER SEMI-TRAILERS
TST SERIES
“GASOIL / FUEL-OIL / DIESEL/WATER/SLUDGE”
- Model: TST Line Top Loading Tanker Semi-Trailer
- Multi purpose applications for various materials as asphalt, fuel-oil, diesel, water, etc.
- Internal volume: Optimal 33.300 lt (Capacities from 24.000 up to 55.000 liters)
- Shape: Elliptic
- Overall Length: 10.500 mm (up to 14.500mm)
- Axles:
- 3 Units, with 12/14/16 tons payload
- Mechanical HD steel leaf springs, 10 lays
- Local make, as per ISO/TUV Norms (BPW compatible),
- Drum brakes with automatic adjuster (Wabco & Haldex)
- ST-52 mono-block chassis with I section profile
- Tank Equipment:
- Single/triple compartment with 3 no. of beaters
- A1 Class ST-37 milded shell thickness: 5mm floor / 4mm sides
- 2 x Manhole tap for loading
- 2” discharging unit with butterfly valve with 15 meters tubing
- Stairs and walkaway on the top
- King pin: 2” or 3”
- OMS 3rd wheel (2 x 24 tons)
- Tyres: 4-6-12 units, Bridgestone – Pirelli – Fulda – Lassa make, 385/65R22.5 size with 11.75×22.5 wheels (+1 unit step set)
- Plastic mudguards
- 2 lays of epoxy primer coated tipper body after sand blasting and undercoating
- 24V Electricity installation as per EEC norms with 7 functioned rear lambs and 6 side lambs.
- Spare tire locater, accessory box, food box, small water tank (for driver), rear bumper, stair, water tanker, fire extinguisher box
Optional Items:
- ABS/EBD Brakes
- Internal PU coating for drinking water transport
- Stainless steel tank
- Pump for discharging
- Pump for charging / discharging
- Diesel engine for pump
- PTO for pump
- Various volume x axle capacity & combinations
- DSS™ application for non-explosion tanker (Please ask for IMMA’s patented innovative product DSS™)
IMMA PST SERIES “LPG TANKER SEMI-TRAILERS”
- Model: PST-XX
- Capacity: 30 – 55 m³
- LPG and Natural Gas transporting semi-trailer
- I-Cross sectioned ST-52 A1 Class milded steel main chassis
- Overall Length: 10.500 mm (up to 14.500mm)
- Axles:
- 2 or 3 Units, with 12/14/16 tons payload
- Mechanical HD leaf springs, 10 lays
- Local make, as per ISO/TUV Norms (BPW Compatible),
- Drum brakes with automatic adjuster (Wabco & Haldex)
- OMS 3rd wheels (each 24 tons payload)
- Tank Equipment :
- Shape cylindrical (Elipsoidal concave sides)
- Size (for PST-55, 55 m³): Ø2.350mm, L:12.750mm
- Thickness: 10mm (Sides:12mm)
- BodyProject code: AD-2000 / PED97/23/EC as per EU regulations
- Design temperature: Min -10°C, max +50°C
- Design pressure: 17,5 Bar
- Test pressure: 27,5 Bar
- Made of P355 (as per EN 10028-2/3)
- Tank equipment: 1 x DN 50 Block flansh, 1x DN 80 Block Flansh, 1 x Hydraulic operator, 1 x 2” Ball (Sphere) walve, 3 x 2” Security ventile, 1 x 2” Hydraulic valve, 1 x 3” Hydraulic valve, 1 x Rotagech, Manometer and thermometer
- Sandblasted + 1 lay antidust + 2 lays epoxy interlined, 2 lays final epoxy coating
- Tank high pressure controls and tests made by 3rd individual accredited surveillance reported, including hydrostatic pressure & size tests with project aproval.
- King pin: 2” or 3”
- Mechanical foot (1.450 mm)
- Tyres: 4-6-12 units, Bridgestone – Pirelli – Fulda – Lassa make, 385/65R22.5 size with 11.75×22.5 wheels (+1 unit step set)
- Plastic mudguards
- 2 lays of epoxy primer coated tipper body after sand blasting and undercoating
- 24V Electricity installation as per EEC norms with 7 functioned rear lambs and 6 side lambs.
- Spare tire locater, accessory box, food box, small water tank (for driver), rear bumper, stair, water tanker, fire extinguisher box